MAX6466XR34+T Overview
As you can see, this power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During operation, the power ic is supplied with a voltage of 3.6V. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. In total, IC powers are 3 pins on the board. Power managment ic pin count is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. It is estimated that the voltage supervisor's supply current is 3.5μA. It is always advisable to use MAX6466, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 3.5μA.
MAX6466XR34+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current
MAX6466XR34+T Applications
There are a lot of Maxim Integrated MAX6466XR34+T Voltage Supervisors applications.
- Important electronics for automotive protection
- emergency room
- Important electronics for automotive safety
- Dash board
- Battery-powered equipment
- DSP
- DC stabilized power supply module
- Battery cars
- Detection of phase loss
- Automotive power systems
