MAX6465UK38+T Overview
It is mounted through 5 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SOT-23-5 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 3.6V. Using Surface Mount, IC management is mounted. In total, IC powers are 5 pins on the board. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. As far as the supply current of the power management is concerned, it is 3.5μA. The maximum supply temperature that PMIC chip can work with is 3.5μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.
MAX6465UK38+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current
MAX6465UK38+T Applications
There are a lot of Maxim Integrated
MAX6465UK38+T Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
