MAX6465UK31+T Overview
There are 5 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.6V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. In total, the power management has 5 pins in it. There are 5 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C . Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 3.5μA volt supply current. It is always advisable to use MAX6465, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 3.5μA.
MAX6465UK31+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.5μA operating supply current
MAX6465UK31+T Applications
There are a lot of Maxim Integrated MAX6465UK31+T Voltage Supervisors applications.
- Sensitive sensors
- DC stabilized power supply module
- Radar
- Electric heating appliances
- Telecommunications equipment
- Urban rail transit weak current power monitoring
- Automotive power systems
- Medical-specific isolation transformer
- Battery cars
- Detection of phase loss
