MAX6463UR20+T Overview
There are 3 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. A supply voltage of 3.6V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. It has a total of 3 pins that are attached to IC management. 3 pins are on the supervisor. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 3.5μA. It is always advisable to use MAX6463, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.5μA.
MAX6463UR20+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current
MAX6463UR20+T Applications
There are a lot of Maxim Integrated MAX6463UR20+T Voltage Supervisors applications.
- Embedded computing
- DSP
- Detection of phase sequence
- Insulation fault location system
- Household appliances
- Leakage protection
- Automotive permanent magnet synchronous motors
- Electronics installed in the vehicle
- Transformer load monitoring equipment
- Microcontroller system
