MAX6461XR25+T Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. A Strip package is used to package the power management. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset, Voltage Detector products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. There are a total of 3 pins on power management. This power management system has 3 pins. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. For this power management, there is an 3.5μA volt supply current. The maximum supply temperature voltage supervisor can handle is 3.5μA.
MAX6461XR25+T Features
Simple Reset/Power-On Reset, Voltage Detector type
Minimum supply voltage of 1V
3.5μA operating supply current
MAX6461XR25+T Applications
There are a lot of Maxim Integrated MAX6461XR25+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Transformer load monitoring equipment
- Detection of phase sequence
- FPGA design
- Microprocessor system
- Power distribution systems of ICU
- Dash board
- Medical-specific insulation monitor
- Functional modules
- Leakage protection
