MAX6461UR32+T Overview
A total of 3 terminals are used to mount this power management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. There are TO-236-3 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset, Voltage Detector products. When a supply voltage of 3.6V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A total of 3 pins are located on this power management. 3 pins make up the power management. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). For this power management, there is an 3.5μA volt supply current. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.5μA.
MAX6461UR32+T Features
Simple Reset/Power-On Reset, Voltage Detector type
Minimum supply voltage of 1V
3.5μA operating supply current
MAX6461UR32+T Applications
There are a lot of Maxim Integrated MAX6461UR32+T Voltage Supervisors applications.
- Military communications
- Fire equipment power monitoring system
- Battery cars
- Data storage applications
- Battery cars
- Detection of phase imbalance
- Refrigeration
- DSP
- Power distribution systems of operating room
- Electric heating appliances
