MAX6461UR30+T Overview
A total of 3 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When a supply voltage of 3.6V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The mount is attached to Surface Mount. In total, the power management has 3 pins in it. 3 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Push-Pull during operation. The supervisor's supply current is specified to 3.5μA. For similar manage ics search of the manufacturer, you can always refer to MAX6461, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.5μA.
MAX6461UR30+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.5μA operating supply current
MAX6461UR30+T Applications
There are a lot of Maxim Integrated MAX6461UR30+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Satellite navigation
- Fire equipment power monitoring system
- Utility meter
- Efficient information transmission
- DVR
- Sensitive sensors
- Detection of phase sequence
- DC stabilized power supply module
- Consumer electronics
