MAX6455UT31S+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. There are 2 channels on this power managment ic that can be found in a series. Please refer to power management for SOT-23-6 functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. When 3.6V is applied to the power ic, it conducts. IC management is possible to find a succession of 2 voltages that have been checked. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. 6 pins are present in total in this power management. There are 6 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6455, which is the base power ics number.
MAX6455UT31S+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current
MAX6455UT31S+T Applications
There are a lot of Maxim Integrated MAX6455UT31S+T Voltage Supervisors applications.
- Linux and server computing
- Leakage current detection
- Refrigeration
- DVR
- Analog circuit
- Magnetic resonance imaging
- Kitchen appliances
- Display equipment
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
