MAX6455UT29S+T Overview
There are 6 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 3.3V. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 6 pins on the board. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6455.
MAX6455UT29S+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current
MAX6455UT29S+T Applications
There are a lot of Maxim Integrated MAX6455UT29S+T Voltage Supervisors applications.
- Unattended substation automation
- Efficient information transmission
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- Automotive permanent magnet synchronous motors
- Detection of phase loss
- Battery cars
- Radio
- Sensitive sensors
- Power distribution systems of ICU
