MAX6453UT23S+T Overview
It is mounted through 6 terminals on the power management. Packaged in a Strip-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SOT-23 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3.3V. During operation, the power ic is supplied with a voltage of 2. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. 6 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. As far as the supply current of the power management is concerned, it is 7μA.
MAX6453UT23S+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current
MAX6453UT23S+T Applications
There are a lot of Maxim Integrated
MAX6453UT23S+T Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
