MAX6452UT29L+T Overview
There are 6 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached SOT-23-6 functions for your reference in this IC power. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.6V is applied to the power ic, it conducts. Power management conducts at a voltage of 2. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 6 pins in it. There are 6 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 7μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use MAX6452, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6452UT29L+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current
MAX6452UT29L+T Applications
There are a lot of Maxim Integrated MAX6452UT29L+T Voltage Supervisors applications.
- DC stabilized power supply module
- Functional modules
- Radio
- Rechargeable batteries
- Efficient information transmission
- Medical-specific isolation transformer
- Power distribution systems of operating room
- Important electronics for automotive protection
- Power distribution systems of CCU
- Detection of phase imbalance
