MAX6452UT26L+ Overview
This power management consists of 6 mounting terminals on which it can be mounted. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 3.6V. When 2 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. Power managment ic pin count is 6. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector.
MAX6452UT26L+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
MAX6452UT26L+ Applications
There are a lot of Maxim Integrated MAX6452UT26L+ Voltage Supervisors applications.
- Solar power charger
- Detection of phase sequence
- Medical-specific isolation transformer
- Power distribution systems of operating room
- Household appliances
- Medical-specific insulation monitor
- Efficient information transmission
- Unattended substation automation
- emergency room
- DVR
