MAX6450UT26L+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. Please find attached SOT-23-6 functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3.6V is applied to the power ic, it conducts. Power ics operate at 2 supply voltages. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 6 pins on power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 7μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by MAX6450.
MAX6450UT26L+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
7μA operating supply current
MAX6450UT26L+T Applications
There are a lot of Maxim Integrated MAX6450UT26L+T Voltage Supervisors applications.
- Battery cars
- Utility meter
- Medical-specific isolation transformer
- Kitchen appliances
- External alarm
- Sensitive sensors
- Leakage protection
- Efficient information transmission
- Power distribution systems of ICU
- Low voltage/high power - AI, GPU
