MAX6425UK42+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 5V. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 2.5μA. A similar IC managements number of the manufacturer can always be found by using MAX6425, the base power ics number.
MAX6425UK42+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current
MAX6425UK42+T Applications
There are a lot of Maxim Integrated MAX6425UK42+T Voltage Supervisors applications.
- Display equipment
- FPGA design
- Microcontroller system
- Data storage applications
- Rechargeable batteries
- Electrical fire monitoring system
- Set top box
- Battery cars
- Military electronics
- Leakage protection
