MAX6418UK45+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 2 channels, each of which can be used independently. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 5V supply voltages. When 2 is applied to the power ic, it conducts. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 2.7μA is the recommended value. There are other features such as RESET THRESHOLD VOLTAGE IS 3V to name a few. To find similar IC managements from the manufacturer, you can always search by MAX6418.
MAX6418UK45+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
2.7μA operating supply current
MAX6418UK45+T Applications
There are a lot of Maxim Integrated MAX6418UK45+T Voltage Supervisors applications.
- Battery cars
- Computer applications
- Detection of phase loss
- Utility meter
- DVR
- Stable power system
- Leakage protection
- DC stabilized power supply module
- Set top box
- Solar power charger
