MAX6412UK46+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. A Strip package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for SOT-23 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. There are 5 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In order to maintain a stable supply current for the power management, 2.7μA is the recommended value. Additionally, IC management are a variety of features, for example [0], to name a few.
MAX6412UK46+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.7μA operating supply current
MAX6412UK46+T Applications
There are a lot of Maxim Integrated MAX6412UK46+T Voltage Supervisors applications.
- Military communications
- Urban rail transit weak current power monitoring
- Set top box
- Computer applications
- Dash board
- Digitally controlled LDO regulators circuit
- Unattended substation automation
- Detection of phase loss
- Analog circuit
- Automotive permanent magnet synchronous motors
