MAX6410BS42+T Overview
Power management is mounted through 4 terminals. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. There are 4-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. In total, IC powers are 4 pins on the board. Power managment ic pin count is 4. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 1μA. To find similar IC managements from the manufacturer, you can always search by MAX6410.
MAX6410BS42+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6410BS42+T Applications
There are a lot of Maxim Integrated MAX6410BS42+T Voltage Supervisors applications.
- Data storage applications
- Battery-powered equipment
- Detection of phase sequence
- DSP
- Refrigeration
- Embedded computing
- Military electronics
- Leakage protection
- Radar
- Power distribution systems of CCU
