MAX6410BS40+T Overview
This power management consists of 4 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. Please refer to power management for 4-WFBGA, CSPBGA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 3V supply voltages. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. It has a total of 4 pins that are attached to IC management. 4 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 1μA. For similar manage ics search of the manufacturer, you can always refer to MAX6410, the base PMIC number.
MAX6410BS40+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6410BS40+T Applications
There are a lot of Maxim Integrated MAX6410BS40+T Voltage Supervisors applications.
- Precision measurement
- Embedded computing
- Unattended substation automation
- Battery cars
- Power distribution systems of operating room
- Sensitive sensors
- Microcontroller system
- Dash board
- Detection of phase imbalance
- Low voltage/high power - AI, GPU
