MAX6409BS42+T Overview
A total of 4 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. In this PMIC, you can find 4-WFBGA, CSPBGA functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When 3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. In total, the power management has 4 pins in it. 4 pins make up the power management. It is recommended that Vsup should not be less than 1.2V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~85°C . Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 1μA. A similar IC managements number of the manufacturer can always be found by using MAX6409, the base power ics number.
MAX6409BS42+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6409BS42+T Applications
There are a lot of Maxim Integrated MAX6409BS42+T Voltage Supervisors applications.
- Sensitive sensors
- Important electronics for automotive protection
- Analog circuit
- Fire equipment power monitoring system
- Computer applications
- Dash board
- Refrigeration
- Power distribution systems of operating room
- Power distribution systems of CCU
- DSP
