MAX6408BS27+T Overview
As you can see, this power management is mounted through 4 terminals. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 4-WFBGA, CSPBGA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 3V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. In total, IC powers are 4 pins on the board. This power management system has 4 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 1μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6408, the base power ics number.
MAX6408BS27+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6408BS27+T Applications
There are a lot of Maxim Integrated MAX6408BS27+T Voltage Supervisors applications.
- DC stabilized power supply module
- Medical-specific insulation monitor
- Set top box
- Consumer electronics
- Electric heating appliances
- Data storage applications
- Digitally controlled LDO regulators circuit
- FPGA design
- Low voltage/high power - AI, GPU
- DSP
