MAX6407BS26+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 4-WFBGA, CSPBGA package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 3V. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. In total, it has 4 pins on IC management. There are 4 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 1μA volt supply current. You can always use MAX6407, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6407BS26+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6407BS26+T Applications
There are a lot of Maxim Integrated MAX6407BS26+T Voltage Supervisors applications.
- Power distribution systems of ICU
- Computer applications
- Fire equipment power monitoring system
- Automotive power systems
- Power distribution systems of CCU
- Leakage protection
- Dash board
- Radar
- Set top box
- Consumer electronics
