MAX6406BS33+T Overview
As you can see, this power management is mounted through 4 terminals. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 4-WFBGA, CSPBGA functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. In total, IC powers are 4 pins on the board. Power managment ic pin count is 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C degrees. Power management has an output of Push-Pull, Totem Pole during operation. There is a 1μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6406, which is the base power ics number.
MAX6406BS33+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current
MAX6406BS33+T Applications
There are a lot of Maxim Integrated MAX6406BS33+T Voltage Supervisors applications.
- External alarm
- Sensitive sensors
- Medical-specific isolation transformer
- Microprocessor system
- Smartphones
- emergency room
- Fire equipment power monitoring system
- Leakage current detection
- Power distribution systems of ICU
- Magnetic resonance imaging
