MAX6404BS43+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 4-WFBGA, CSPBGA functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. In total, IC powers are 4 pins on the board. Pin count of the power management is 4. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 1μA volt supply current. It is always advisable to use MAX6404, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6404BS43+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current
MAX6404BS43+T Applications
There are a lot of Maxim Integrated MAX6404BS43+T Voltage Supervisors applications.
- Dash board
- Detection of phase imbalance
- Multi-voltage system
- Linux and server computing
- Military electronics
- Smart meter
- DSP
- External alarm
- Microcontroller system
- Stable power system
