MAX6398ATT+ Overview
This power management consists of 6 mounting terminals on which it can be mounted. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 6-WDFN Exposed Pad functions. There are a lot of similarities between this IC power and other Regulator/Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 14V. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 6 pins. 6 pins make up the power management. There should be a minimum voltage supply (Vsup) of 5.5V for this PMIC. There should be no more than 72V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector.
MAX6398ATT+ Features
Regulator/Supervisor type
Minimum supply voltage of 5.5V
MAX6398ATT+ Applications
There are a lot of Maxim Integrated MAX6398ATT+ Voltage Supervisors applications.
- Analog circuit
- Important electronics for automotive protection
- Smart meter
- DVR
- Battery cars
- Low voltage/high power - AI, GPU
- Consumer electronics
- Automotive permanent magnet synchronous motors
- emergency room
- Refrigeration
