MAX6392KA29+T Overview
It is mounted through 8 terminals on the power management. Packaged in the form of a Strip, power management is easy to use. Please refer to this PMIC for 1 functions. Power management consists of 2 channels, each of which can be used independently. In this PMIC, you can find SOT-23-8 functions for your reference. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 2. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. 8 pins are on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. It is estimated that the voltage supervisor's supply current is 15μA. The voltage supervisor requires a power source of 1.5/5V volts in order to work correctly.
MAX6392KA29+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
15μA operating supply current
MAX6392KA29+T Applications
There are a lot of Maxim Integrated MAX6392KA29+T Voltage Supervisors applications.
- Sensitive sensors
- Urban rail transit weak current power monitoring
- Utility meter
- Network equipment
- Detection of phase imbalance
- Satellite navigation
- Personal computers
- emergency room
- Leakage protection
- Microprocessor system
