MAX6391KA29+T Overview
There are 8 terminals connected to this power management, which makes it easy to mount. A Strip package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 2 channels. For your reference, this PMIC includes a list of SOT-23-8 functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 2. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 15μA. This power management requires 1.5/5V power to work.
MAX6391KA29+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
15μA operating supply current
MAX6391KA29+T Applications
There are a lot of Maxim Integrated MAX6391KA29+T Voltage Supervisors applications.
- Detection of phase sequence
- emergency room
- Automotive permanent magnet synchronous motors
- Telecommunications equipment
- Cloud computing
- Embedded computing
- Radar
- Stable power system
- Leakage protection
- Detection of phase imbalance
