MAX6388XS18D3-T Overview
As you can see, this power management is mounted through 4 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. This power management is made up of 2 channels which are available in a series format. Please refer to power management for SC-82A, SOT-343 functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. During operation, the power ic is supplied with a voltage of 1.8V. IC management is possible to find a succession of 2 voltages that have been checked. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 4 pins on the board. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. You can always use MAX6388, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 1/5.5V volts of power.
MAX6388XS18D3-T Features
Multi-Voltage Supervisor type
MAX6388XS18D3-T Applications
There are a lot of Maxim Integrated MAX6388XS18D3-T Voltage Supervisors applications.
- Insulation fault location system
- Low voltage/high power - AI, GPU
- Medical-specific isolation transformer
- Power distribution systems of CCU
- Important electronics for automotive protection
- Unattended substation automation
- External alarm
- Multi-voltage system
- Stable power system
- Detection of phase sequence
