Name: MAX6388LT22D3+T
Brand: Maxim Integrated
SKU: MAX6388LT22D3+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	111 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-WFDFN
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Type	Multi-Voltage Supervisor
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	167.7mW
Technology	BICMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	MAX6388
Output	Push-Pull, Totem Pole
Pin Count	6
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	7μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active High
Voltage - Threshold	2.19V Adj
Number of Voltages Monitored	2
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.013mA
Undervoltage Threshold	1.54V
Overvoltage Threshold	1.61V
Height Seated (Max)	0.8mm
Length	1.5mm
Width	1mm
RoHS Status	ROHS3 Compliant

MAX6388LT22D3+T Product Details

MAX6388LT22D3+T Overview

There are 6 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 6-WFDFN functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 1.8V. A supply voltage of 2 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 6 pins on the board. This power management system has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. In order to maintain a stable supply current for the power management, 7μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX6388, the base power ics number.