MAX6386LT46D3+T Overview
There are 6 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 6-WFDFN functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1.8V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 6 pins on power management. 6 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 7μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6386, the base power ics number.
MAX6386LT46D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6386LT46D3+T Applications
There are a lot of Maxim Integrated MAX6386LT46D3+T Voltage Supervisors applications.
- Power distribution systems of CCU
- Efficient information transmission
- Unattended substation automation
- DVR
- DC stabilized power supply module
- DSP
- Magnetic resonance imaging
- Insulation fault location system
- Leakage protection
- Network equipment
