Name: MAX6386LT45D3+T
Brand: Maxim Integrated
SKU: MAX6386LT45D3+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-WFDFN
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	167.7mW
Technology	BICMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	MAX6386
Output	Open Drain or Open Collector
Pin Count	6
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	7μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.5V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.39V
Max Reset Threshold Voltage	4.61V
Undervoltage Threshold	1.54V
Overvoltage Threshold	1.61V
Height Seated (Max)	0.8mm
RoHS Status	ROHS3 Compliant

MAX6386LT45D3+T Product Details

MAX6386LT45D3+T Overview

There are 6 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 6-WFDFN functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. Power managment ic pin count is 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supply current of the power management is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6386, the base power ics number.