MAX6385LT31D3+T Overview
There are 6 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. Please find attached 6-WFDFN functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When 1.8V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 6. 6 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6385, which is the base power ics number.
MAX6385LT31D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6385LT31D3+T Applications
There are a lot of Maxim Integrated MAX6385LT31D3+T Voltage Supervisors applications.
- Analog circuit
- Automotive permanent magnet synchronous motors
- Low voltage/high power - AI, GPU
- Military electronics
- Functional modules
- Efficient information transmission
- Transformer load monitoring equipment
- Important electronics for automotive safety
- Digitally controlled LDO regulators circuit
- Stable power system
