MAX6384LT44D3+T Overview
There are 6 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 6-WFDFN functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 6 pins on power management. 6 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. For similar manage ics search of the manufacturer, you can always refer to MAX6384, the base PMIC number.
MAX6384LT44D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6384LT44D3+T Applications
There are a lot of Maxim Integrated MAX6384LT44D3+T Voltage Supervisors applications.
- Household appliances
- Microcontroller system
- Solar power charger
- Leakage current detection
- Power distribution systems of operating room
- DVR
- Multi-voltage system
- Important electronics for automotive protection
- Stable power system
- Electric heating appliances
