MAX6383XR40D1+T Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Power management is packaged in a Strip way. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SC-70, SOT-323 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 3. 3 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified.
MAX6383XR40D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6383XR40D1+T Applications
There are a lot of Maxim Integrated MAX6383XR40D1+T Voltage Supervisors applications.
- Computer applications
- Dash board
- Important electronics for automotive safety
- emergency room
- Efficient information transmission
- Utility meter
- Functional modules
- Unattended substation automation
- Urban rail transit weak current power monitoring
- Household appliances
