MAX6383LT25D1+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for WFDFN functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.8V. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 6 pins on power management. This power management system has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The supervisor's supply current is specified to 7μA. In addition, IC management are other features such as [0], to mention only a few.
MAX6383LT25D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6383LT25D1+T Applications
There are a lot of Maxim Integrated MAX6383LT25D1+T Voltage Supervisors applications.
- Power distribution systems of CCU
- Military communications
- Transformer load monitoring equipment
- Leakage protection
- Smart meter
- Medical-specific isolation transformer
- FPGA design
- WiFi router
- Refrigeration
- Multi-voltage system
