MAX6383LT17D6+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. A Strip package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 6-WFDFN functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 1.8V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. This power management system has 6 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 7μA volt supply current.
MAX6383LT17D6+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6383LT17D6+T Applications
There are a lot of Maxim Integrated MAX6383LT17D6+T Voltage Supervisors applications.
- Important electronics for automotive protection
- Radar
- Detection of phase imbalance
- DSP
- Electrical fire monitoring system
- Rechargeable batteries
- Precision measurement
- Transformer load monitoring equipment
- Radio
- Multi-voltage system
