MAX6383LT16D1+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 6-WFDFN functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 1.8V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, it has 6 pins on IC management. This power management system has 6 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by MAX6383.
MAX6383LT16D1+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6383LT16D1+ Applications
There are a lot of Maxim Integrated MAX6383LT16D1+ Voltage Supervisors applications.
- Military communications
- Automotive permanent magnet synchronous motors
- Battery-powered equipment
- Electronics installed in the vehicle
- Data storage applications
- Cloud computing
- Multi-voltage system
- Rechargeable batteries
- Important electronics for automotive protection
- Electric heating appliances
