MAX6382LT38D3+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. Please find attached WFDFN functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 1.8V. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. This power management has 6 pins. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. Supervisors are also additional features, such as [0] for example, which are worth mentioning.
MAX6382LT38D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6382LT38D3+T Applications
There are a lot of Maxim Integrated MAX6382LT38D3+T Voltage Supervisors applications.
- Display equipment
- Electric heating appliances
- Urban rail transit weak current power monitoring
- Automotive power systems
- Automotive permanent magnet synchronous motors
- DSP
- Set top box
- Medical-specific isolation transformer
- Leakage current detection
- Magnetic resonance imaging
