MAX6382LT30D2+T Overview
A total of 6 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. There are 6-WFDFN functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When 1.8V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 6 pins in it. This power management has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supply current of the power management is 7μA. You can always use MAX6382, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6382LT30D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6382LT30D2+T Applications
There are a lot of Maxim Integrated MAX6382LT30D2+T Voltage Supervisors applications.
- Data storage applications
- Insulation fault location system
- Detection of phase sequence
- Utility meter
- DVR
- emergency room
- Electronics installed in the vehicle
- Automotive power systems
- Smart meter
- Power distribution systems of infant care room
