MAX6382LT22D3+T Overview
A total of 6 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 6-WFDFN functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 1.8V. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. There are a total of 6 pins on power management. This power management system has 6 pins. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. It is always advisable to use MAX6382, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6382LT22D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6382LT22D3+T Applications
There are a lot of Maxim Integrated MAX6382LT22D3+T Voltage Supervisors applications.
- Detection of phase sequence
- Radio
- Analog circuit
- Multi-voltage system
- Automotive permanent magnet synchronous motors
- Microcontroller system
- Set top box
- Consumer electronics
- Leakage current detection
- Personal computers
