MAX6381XR43D2+T Overview
It is mounted through 3 terminals on the power management. A Strip package is used to package the power management. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SC-70, SOT-323 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.8V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 3 pins. This power management has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current.
MAX6381XR43D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381XR43D2+T Applications
There are a lot of Maxim Integrated MAX6381XR43D2+T Voltage Supervisors applications.
- Military communications
- Power distribution systems of CCU
- Magnetic resonance imaging
- Fire equipment power monitoring system
- Sensitive sensors
- Battery cars
- Detection of phase sequence
- DSP
- Military electronics
- Telecommunications equipment
