MAX6381XR30D3+T Overview
As you can see, this power management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-70, SOT-323 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.8V volt supply. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. 3 pins are present in total in this power management. Pin count of the power management is 3. IC management can only work with a supply voltage of 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.
MAX6381XR30D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381XR30D3+T Applications
There are a lot of Maxim Integrated MAX6381XR30D3+T Voltage Supervisors applications.
- Battery cars
- Medical-specific isolation transformer
- Microprocessor system
- Analog circuit
- Smartphones
- Electric heating appliances
- Low voltage/high power - AI, GPU
- DVR
- Power distribution systems of ICU
- Electronics installed in the vehicle
