MAX6381XR17D2+T Overview
There are 3 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached SC-70, SOT-323 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 1.8V. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. The pins of the power management system count 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.
MAX6381XR17D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381XR17D2+T Applications
There are a lot of Maxim Integrated MAX6381XR17D2+T Voltage Supervisors applications.
- Battery-powered equipment
- Radar
- Leakage protection
- Medical-specific isolation transformer
- Sensitive sensors
- Insulation fault location system
- Linux and server computing
- Leakage current detection
- Set top box
- Consumer electronics
