MAX6381LT26D4+T Overview
It is mounted through 6 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 6-WDFN functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 1.8V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 6 pins on the board. 6 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6381, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6381LT26D4+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381LT26D4+T Applications
There are a lot of Maxim Integrated MAX6381LT26D4+T Voltage Supervisors applications.
- Detection of phase loss
- Urban rail transit weak current power monitoring
- External alarm
- Military electronics
- DVR
- Important electronics for automotive protection
- Power distribution systems of CCU
- FPGA design
- Automotive power systems
- WiFi router
