MAX6381LT23D3+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please find attached 6-WFDFN functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.8V volt supply. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 6 pins are located on this power management. There are 6 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. It is always advisable to use MAX6381, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6381LT23D3+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381LT23D3+T Applications
There are a lot of Maxim Integrated MAX6381LT23D3+T Voltage Supervisors applications.
- DVR
- Analog circuit
- Detection of phase imbalance
- Military communications
- Battery cars
- Computer applications
- Utility meter
- Refrigeration
- Battery-powered equipment
- Multi-voltage system
