MAX6366LKA31+T Overview
Power management is mounted through 8 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 2 channels. In this PMIC, you can find SOT-23-8 functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 2.8V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. 8 pins make up the power management. It is recommended that Vsup should not be less than 0V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The power management's supply current is 15μA. Among other features, IC power can be also taken advantage of [0], for instance. It is always advisable to use MAX6366, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 2.5/5V volts of power in order for this voltage supervisor to operate.
MAX6366LKA31+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6366LKA31+T Applications
There are a lot of Maxim Integrated MAX6366LKA31+T Voltage Supervisors applications.
- Household appliances
- Magnetic resonance imaging
- Automotive permanent magnet synchronous motors
- Military electronics
- External alarm
- Leakage current detection
- Functional modules
- Microprocessor system
- Detection of phase loss
- Detection of phase sequence
