MAX6362HUT29+T Overview
A total of 6 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 2 channels can be found on this supervisor. For your reference, this PMIC includes a list of SOT-23-6 functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.38V. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 6 pins on IC management. 6 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 15μA. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6362, which is the base power ics number. The voltage supervisor requires a power source of 2.5/5V volts in order to work correctly.
MAX6362HUT29+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6362HUT29+T Applications
There are a lot of Maxim Integrated MAX6362HUT29+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Medical-specific isolation transformer
- Important electronics for automotive protection
- Telecommunications equipment
- Insulation fault location system
- Power distribution systems of ICU
- Satellite navigation
- Unattended substation automation
- Battery-powered equipment
- Display equipment
