MAX6348XR41-T Overview
There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 245 for the package during reflow. IC management conducts in a 3V-voltage supply. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. This power management has 3 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 500nA volt supply current. You can always use MAX6348, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6348XR41-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500nA operating supply current
MAX6348XR41-T Applications
There are a lot of Maxim Integrated MAX6348XR41-T Voltage Supervisors applications.
- Sensitive sensors
- Utility meter
- Leakage protection
- Power distribution systems of CCU
- Solar power charger
- Efficient information transmission
- Kitchen appliances
- Electric heating appliances
- Electrical fire monitoring system
- Leakage current detection
