MAX6340UK26+T Overview
There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. The mount is attached to Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 5 pins that are attached to IC management. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 2.5μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6340, which is the base power ics number.
MAX6340UK26+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current
MAX6340UK26+T Applications
There are a lot of Maxim Integrated MAX6340UK26+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Important electronics for automotive protection
- Detection of phase sequence
- Embedded computing
- FPGA design
- Radar
- Precision measurement
- Set top box
- DVR
- Rechargeable batteries
