MAX6339GUT+T Overview
This power management consists of 6 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. A series of 4 channels can be found on this supervisor. For your reference, this PMIC includes a list of SOT-23-6 functions. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 2.5V volt supply. A supply voltage of 4 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 6 pins on power management. Power managment ic pin count is 6. IC management can only work with a supply voltage of 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 55μA. A similar IC managements number of the manufacturer can always be found by using MAX6339, the base power ics number.
MAX6339GUT+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
55μA operating supply current
MAX6339GUT+T Applications
There are a lot of Maxim Integrated MAX6339GUT+T Voltage Supervisors applications.
- Kitchen appliances
- emergency room
- Utility meter
- Microprocessor system
- Electrical fire monitoring system
- Magnetic resonance imaging
- Detection of phase imbalance
- Transformer load monitoring equipment
- Rechargeable batteries
- Low voltage/high power - AI, GPU
