MAX6327UR27+T Overview
It is mounted through 3 terminals on the power management. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 500nA. To find similar IC managements from the manufacturer, you can always search by MAX6327.
MAX6327UR27+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500nA operating supply current
MAX6327UR27+T Applications
There are a lot of Maxim Integrated MAX6327UR27+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- Automotive permanent magnet synchronous motors
- Linux and server computing
- Consumer electronics
- Automotive power systems
- Sensitive sensors
- Microcontroller system
- Battery cars
- Network equipment
- Digitally controlled LDO regulators circuit
